Specification
编码器类型 (Encoder type) | 1、光电编码器 Optical encoder 2、磁编码器 Magnetic encoder 3、旋转变压器Resolver 备注：多种分辨率可选，增量式、绝对值式可选。 Note: Multiple resolutions are available；Incremental and absolute values are available. |
径向负载 (Max radial force) | 120N @ 20mm from the flange | 环境条件 Environmental conditions | 使用环境温度： -20℃~ +40℃； Temperature: -20℃~ +40℃ 使用环境湿度：≤90%RH（无凝露）； Relative humidity: ≤90%RH(No dewing) 安装环境：远离腐蚀、可燃性气体，油滴，灰尘， 海拔≤1000m(1000~4000m，降额使用)； Installation environment: Far away active gas, Combustible gas, oil drop, ash. altitude≤1000m(1000~4000m，Derating use)； 存储环境：-20℃~ +60℃，≤85%RH（无凝露）。 Storage Condition: -20℃~ +60℃，≤85%RH(No dewing). |
轴向负载 (Max axial force) | 60N |
绝缘等级 (Insulation Class) | Class B |
防护等级 (Protection level) | IP65 |
类型 (Model） | 单位(Unit) | FL38SV20 |
额定功率(Rated power) Pn | W | 50 |
额定电压(Rated voltage) U | VDC | 300 |
额定转速(Rated speed) nn | RPM | 3000 |
额定转矩(Rated torque) Tn | N·m | 0.16 |
额定电流(Rated current) In | A | 0.6 |
最大转速(Maximum speed) nmax | RPM | 6000 |
最大转矩(Maximum torque) Tm | N·m | 0.48 |
最大电流(Maximum current) Im | A | 1.8 |
电阻(Line to line resistance) RL | Ω | 30 |
电感(Line to line inductance) LL | mH | 23 |
反电势系数(Back EMF) Ke | V/Krpm | 18 |
转矩系数(Torque constant) Kt | Nm/A | 0.32 |
电气时间常数(Electrical time constant) τe | ms | 0.77 |
机械时间常数（Mechanical time constant) τm | ms | 1.3 |
转动惯量(Rotor inertia) Jm0 | kg.cm2 | 0.026 |
转动惯量带制动器(Rotor inertia with brake) Jm1 | kg.cm2 | 0.0326 |
极数(Number of poles) |
| 10 |
编码器(Encoder) |
| 2500ppr光电编码器（增量式） 2500p/rev incremental encoder |
机身长度(Motor length) L1 | mm | 72 |
机身长度带制动器(Motor length with brake) L2 | mm | 110 |
重量 (Weight) | Kg | 0.4 |
重量带制动器(Weight with brake) | Kg | 0.65 |
Mechanical size
Wiring Diagram
序号 No. | 引出线颜色 Lead Color | 引出线型号 Lead Gauge | 功能 Function | 说明 Description |
1 | 黄色(Yellow) | Cable AWG22 | U相(Phase U) |
|
2 | 红色(Red) | V相(Phase V) |
|
3 | 黑色(Black) | W相(Phase W) |
|
Torque Curve
Customized Design
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector.We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
Downloads
If you need 3D drawings, please contact us directly.