Specification
一般技术特性 (General Technical Information)
编码器类型 (Encoder type) | 1、光电编码器 Optical encoder 2、磁编码器 Magnetic encoder 3、旋转变压器Resolver 备注：多种分辨率可选，增量式、绝对值式可选。 Note: Multiple resolutions are available；Incremental and absolute values are available. |
径向负载 (Max radial force ) | 115N@20mm from the flange | 环境条件 Environmental conditions | 使用环境温度： -20℃~ +40℃； Temperature: -20℃~ +40℃ 使用环境湿度：≤90%RH（无凝露）； Relative humidity: ≤90%RH(No dewing) 安装环境：远离腐蚀、可燃性气体，油滴，灰尘， 海拔≤1000m(1000~4000m，降额使用)； Installation environment: Far away active gas, Combustible gas, oil drop, ash. altitude≤1000m(1000~4000m，Derating use)； 存储环境：-20℃~ +60℃，≤85%RH（无凝露）。 Storage Condition: -20℃~ +60℃，≤85%RH(No dewing). |
轴向负载 (Max axial force ) | 45N |
绝缘等级 (Insulation Class) | B |
防护等级 (Protection level) | IP30 |
电机技术性能 (Motor Technical Specification)
| 单位(Unit) | FL57SVA03 |
额定电压(Rated voltage) | VDC | 36 |
额定转速(Rated speed) | RPM | 3000 |
额定转矩(Rated torque) | N·m | 0.45 |
额定电流(Rated current) | A | 141 |
空载转速(no load speed) | RPM | 4400 |
峰值转矩(Peak torque) | N·m | 1.35 |
峰值电流(Peak current) | A | 16.2 |
电阻(Line to line resistance) | Ω | 0.8 |
电感(Line to line inductance) | mH | 0.8 |
反电势系数(Back EMF) | V/Krpm | 5.6 |
转矩系数(Torque constant) | Nm/A | 0.075 |
极数(Number of poles) |
| 8 |
编码器(Encoder) | CPR | 1000 |
转动惯量(Rotor inertia) | g.cm2 | 320 |
机身长度 (Motor length) L | mm | 96 |
重量(Weight) | Kg | 1.0 |
Mechanical size
Wiring Diagram
序号 No. | 引出线颜色 Lead Color | 引出线型号 Lead Gauge | 功能 Function | 说明 Description |
1 | 红白色(Red/White) | Cable AWG26 | GND | Signal Power negative |
2 | 红色( Red) | VCC:+5VDC | Signal Power positive |
3 | 蓝色(Blue) | EA- | Two-channel differential signal (Three-channel differential signal can be provided). |
4 | 蓝黑色(Blue/Black) | EA+ |
5 | 黑色(Black) | EB- |
6 | 黑白色(Black/White) | EB+ |
7 | 棕色(Brown) | 霍尔HALL A |
|
8 | 橙色(Orange) | 霍尔HALL B |
|
9 | 黄色(Yellow) | 霍尔HALL C |
|
1 | 黄色(Yellow) | Cable AWG18 | U相(Phase U) |
|
2 | 红色(Red) | V相(Phase V) |
|
3 | 黑色(Black) | W相(Phase W) |
|
Torque Curve
Customized Design
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector.We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
Downloads
| Title |
type |
Size(KB) |
Download |
| FL57SVA03 |
.pdf |
185.87 |
|
If you need 3D drawings, please contact us directly.