Specification
General Technical Information
Encoder type | 1. Optical encoder 2. Magnetic encoder 3. Resolver Note: Multiple resolutions are available；Incremental and absolute values are available. |
Max radial force | 115N @ 20mm from the flange | Environmental conditions | Temperature: -20℃~ +40℃ Relative humidity: ≤90%RH(No dewing) Installation environment: Far away active gas, Combustible gas, oil drop, ash. altitude≤1000m(1000~4000m，Derating use) Storage Condition: -20℃~ +60℃，≤85%RH(No dewing). |
Max axial force | 45N |
Insulation Class | Class B |
Protection level | IP65 |
Motor Technical Specification
| Unit | FL80SVA02 |
Rated voltage | VDC | 48 |
Rated speed | RPM | 3000 |
Rated torque | N·m | 1.7 |
Rated current | A | 3000 |
no load speed | RPM | 4000 |
Peak torque | N·m | 5.1 |
Peak current) | A | 45 |
Line to line resistance | Ω | 0.1 |
Line to line inductance | mH | 0.6 |
Back EMF | V/Krpm | 8.4 |
Torque constant | Nm/A | 0.113 |
Number of poles |
| 8 |
Encoder | CPR | 1000 |
Rotor inertia | g.cm2 | 1020 |
Motor length L | mm | 107 |
Weight | Kg | 2.1 |
Mechanical size
Wiring Diagram
No. | Lead Color | Lead Gauge | Function | Description |
1 | Red/White | Cable AWG26 | GND | Signal Power negative |
2 | Red | VCC:+5VDC | Signal Power positive |
3 | Blue | EA- | Two-channel differential signal (Three-channel differential signal can be provided). |
4 | Blue/Black | EA+ |
5 | Black | EB- |
6 | Black/White | EB+ |
7 | Brown | HALL A |
|
8 | Orange | HALL B |
|
9 | Yellow | HALL C |
|
1 | Yellow | Cable AWG16 | U(Phase U) |
|
2 | Red | V(Phase V) |
|
3 | Black | W(Phase W) |
|
Torque Curve
Customized Design
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector.We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
Downloads
| Title |
type |
Size(KB) |
Download |
| FL80SVA02 |
.pdf |
50.77 |
|
If you need 3D drawings, please contact us directly.