IV57

Minimum

Typical

Maximum

unit

Output current (peak)

0.5

-

8.0

A

Input supply voltage (DC)

15

24/36/48

50

VDC

Control signal input current

6

10

16

mA

Control signal interface level

4.5

5

28

Vdc

OC output pull-up voltage

5

-

24

Vdc

Ether-CAT communication frequency

-

100

-

MHz

Insulation resistance

100

-

-

MΩ

Environment

Occasion

It should not be placed next to other heating   equipment. Dust, oil mist, corrosive gas, excessive humidity and strong   vibration should be avoided. Combustible gas and conductive dust should not   be allowed.

Temperature

-10℃ ～ +50℃

Humidity

40 ～ 90%RH

Vibration

5.9m/s2MAX

Protection

IP65

Storage temperature

-20℃～60℃

Altitude

 Below 1000 meters

Weight

1.2KG

GND

DC   power ground

+VDC

DC   power supply positive, power supply voltage range: DC 15~50Vdc, recommended   24Vdc or 36Vdc work.

IN1+

High-speed signal: pulse rising edge   is valid; in1 high level is 4.5~28Vdc, low level is 0~0.5V. In order to   respond reliably to pulse signals, the pulse width should be greater than 1.5   μ s.

IN1-

IN2+

High-speed signal: pulse rising edge   is valid; in2 high level is 4.5~28Vdc, low level is 0~0.5V. In order to   respond reliably to pulse signals, the pulse width should be greater than 1.5   μ s. 

IN2-

IN3+

Low speed signal: pulse rising edge   is valid; in3 high level is 4.5~28Vdc, low level is 0~0.5V. In order to   respond reliably to pulse signals, the pulse width should be greater than 5 μ   s.

IN3-

OUT+

Output signal, generally used for   alarm output, OC emitter open output, requires pull-up level, the maximum   pull-up voltage is 24V.

OUT-

15V

15V voltage output, output current up   to 10mA, reserved

AIN

One way 0-5V analog input, reserved

GND

EGND, 5V voltage reference negative,   reserved

RS232-TX

Serial RS232 transmitter, TTL-3.3V   level, setting or configuration parameters, reserved

RS232-RX

Serial   RS232 transmitter, TTL-3.3V level, setting or configuration parameters,   reserved

5V

Supply   voltage 5V, current 50mA, reserved

1

TX+

Ether   CAT data transmission positive end

Ether CAT IN

2

TX-

Ether   CAT data transmission negative end

3

RX+

Ether   CAT data reception positive end

4

RX-

Ether   CAT data reception negative end

5

NC

Not connected, reserved

6

NC

Not connected, reserved

7

NC

Not connected, reserved

8

NC

Not connected, reserved

1

TX+

Ether   CAT data transmission positive end

Ether CAT  OUT

2

TX-

Ether   CAT data transmission negative end

3

RX+

Ether   CAT data reception positive end

4

RX-

Ether   CAT data reception negative end

5

NC

Not connected, reserved

6

NC

Not connected, reserved

7

NC

Not connected, reserved

8

NC

Not connected, reserved